Wednesday 3 April 2013

Track 2

Work in progress on the first turnout. The crossing was constructed separately in the Easitrac jig. Attaching all of the interlaced sleepers and wires in the correct order requires concentration. The plastic sleepers are still loose and not in their final positions. I'm thinking it will help with the other other stock rail and switch to leave the sleepers loose at this stage - in particular, it will allow me to clear a bit of space to solder the dropper wires. I'm attaching two droppers to each piece of rail as I go along - you can see some of these wires poking out from beneath the board.


Before laying the track I drilled/filed holes through the baseboard for the turnout operation. It's hard to see but I've attached a cut-down 12BA bolt to the switch blade, as recommended by Geoff Jones. This will sit in a brass tube and operate the turnout via a functional tie-bar beneath the trackbed. The current plan is to operate these from DCC via servos.